
Klimas WKCP

Washer head construction screw
Partially threaded construction screw with a wide flange (washer) head and TX drive, manufactured by Klimas Wkręt-met. The large head spreads the load and resists pull-through in rafters, battens and panels.
Coating
Galvanized white zinc. The standard finish, with the widest size range.
- Diameters
5 to 10 mm - Lengths
40 to 600 mm - Drive
TX25, TX30, TX40 - Material
Carbon steel
- ETA-18/0817
- ICC-ES ESR-5302
01 — Sizes
Pick a size
Every washer head size Klimas offers in Canada in white zinc. Tap a row and send it to me for a taxes-included price.
Diameter
Units
Thread = threaded length at the tip; the rest is smooth shank. Ask me about availability and lead time for any size.
02 — What it is for
Uses
- Rafter framing
- Structural timber frames
- Counter-battens and battens
- Wood-based panels
Substrates per Klimas: solid wood, glued laminated timber (CLT, glulam) and laminated veneer lumber (LVL).
03 — Features
How it is built
Flange head
A wide bearing surface pulls the joint tight and resists the head pulling through.
No pre-drilling
High torque strength lets it go in without a pilot hole, even in hardwood.
Milled cutting tip
Klimas says the milled tip cuts screwing resistance by about 20%, easier on batteries and drivers.
Double, serrated thread
A second recessed thread grabs faster. Notches on the thread cut the wood fibres as it goes in.
Shank ribs and wax coating
Ribs ream the hole and the wax coating lowers driving torque.
04 — Technical data
Dimensions

| Ø (D) | Head (DH) | Shank (DS) | Drive |
|---|---|---|---|
| 6 mm (1/4") | 14 mm | 4.3 mm | TX30 |
| 8 mm (5/16") | 21 mm | 5.8 mm | TX40 |
| 10 mm (3/8") | 25 mm | 7 mm | TX40 |
From the Klimas catalogue. Head and shank sizes for diameters under 6 mm on request.
Also from Klimas
Need the other head?
Not sure which size?
Tell me what you are fastening and how thick it is. I will suggest a length and send a taxes-included quote.
Text SimonSend a listKlimas and Wkręt-met are trademarks of Klimas Wkręt-met sp. z o.o., the manufacturer of these products. Canmark Supplies is an independent reseller. Product photos, drawings and technical data are supplied by Klimas Wkręt-met.