Skip to main content
Canmark Supplies

Klimas Wkręt-met · Williams Lake

Structural timber screws by Klimas

Partially threaded construction screws made by Klimas Wkręt-met. Countersunk or washer head, white zinc or SQ Ceramic coating, up to 600 mm long. Quoted taxes included and delivered locally.

  • European approval ETA-18/0817
  • ICC-ES ESR-5302
  • Taxes-included quotes
Klimas logo

01 — The screws

Two heads, two coatings

Both are partially threaded, so the unthreaded shank lets the screw pull two pieces of timber tight. Both drive with a TX (Torx) bit and go in without pre-drilling.

Countersunk construction screw, white zincCountersunk construction screw, SQ Ceramic coating

Klimas WKCS

Countersunk construction screw

Sits flush with the surface. For timber-to-timber framing where the head has to disappear.

  • Diameter3 to 10 mm
  • Length30 to 600 mm
  • CoatingWhite zinc or SQ Ceramic
  • DriveTX10 to TX40
See sizes and specs: Klimas WKCS
Washer head construction screw, white zincWasher head construction screw, SQ Ceramic coating

Klimas WKCP

Washer head construction screw

Wide flange head that spreads the load and resists pull-through. For rafters, battens and panels.

  • Diameter5 to 10 mm
  • Length40 to 600 mm
  • CoatingWhite zinc or SQ Ceramic
  • DriveTX25 to TX40
See sizes and specs: Klimas WKCP

02 — Coatings

White zinc or SQ Ceramic

Same screw, two finishes. SQ Ceramic is the higher-protection one. If you are not sure which your job needs, ask and I will help you pick.

Zinc-plated screws after time in a salt spray chamber, covered in white corrosion
Galvanized steel in the salted atmosphere chamber

White zinc

Code ending -B

  • Galvanized carbon steel, the standard finish
  • The widest range of sizes
  • ETA-18/0817 and ICC-ES ESR-5302
SQ Ceramic coated screws in the same salt spray test
SQ Ceramic in the salted atmosphere chamber

SQ Ceramic (C4)

Code ending -D

  • Zinc and aluminium flake coating rated C4 by Klimas
  • Klimas rates it at 10 times the protection of 5 µm zinc plating and 2 times hot-dip galvanizing
  • UV resistant, heat resistant to 260 °C, no hexavalent chromium
  • Tested at the RISE Institute to Nordtest NT MAT 003

Photos: Klimas Wkręt-met.

Frequently asked

Questions

Need Klimas screws?

Send the size, the quantity or a description of the job. I will reply with availability and a taxes-included quote.

Text SimonSend a list

Klimas and Wkręt-met are trademarks of Klimas Wkręt-met sp. z o.o., the manufacturer of these products. Canmark Supplies is an independent reseller. Product photos, drawings and technical data are supplied by Klimas Wkręt-met.