Skip to main content
Canmark Supplies
Countersunk construction screw, white zinc

Klimas WKCS

Klimas

Countersunk construction screw

Partially threaded construction screw with a countersunk head and TX drive, manufactured by Klimas Wkręt-met. For structural timber-to-timber connections in solid wood, glulam, CLT and LVL, where the head needs to sit flush.

Coating

Galvanized white zinc. The standard finish, with the widest size range.

  • Diameters
    3 to 10 mm
  • Lengths
    30 to 600 mm
  • Drive
    TX10, TX15, TX20, TX25, TX30, TX40
  • Material
    Carbon steel
  • ETA-18/0817
  • ICC-ES ESR-5302

01 — Sizes

Pick a size

Every countersunk size Klimas offers in Canada in white zinc. Tap a row and send it to me for a taxes-included price.

Diameter

Units

8 mm (5/16")Drive TX40Head Ø 14 mm22 lengths
LENGTHTHREAD

Thread = threaded length at the tip; the rest is smooth shank. Ask me about availability and lead time for any size.

YOUR PICK

Tap a size in the list

Text Simon

02 — What it is for

Uses

  • Rafter framing
  • Structural timber frames
  • Timber-to-timber connections
  • Solid wood, glulam, CLT and LVL

Substrates per Klimas: solid wood, glued laminated timber (CLT, glulam) and laminated veneer lumber (LVL).

03 — Features

How it is built

  • Countersunk head with cutting ribs

    Ribs under the head cut a clean countersink so the head finishes flush.

  • No pre-drilling

    High torque strength lets it go in without a pilot hole, even in hardwood.

  • Milled cutting tip

    Klimas says the milled tip cuts screwing resistance by about 20%, easier on batteries and drivers.

  • Double, serrated thread

    A second recessed thread grabs faster. Notches on the thread cut the wood fibres as it goes in.

  • Shank ribs and wax coating

    Ribs ream the hole and the wax coating lowers driving torque.

04 — Technical data

Dimensions

Technical drawing of the WKCS
Ø (D)Head (DH)Shank (DS)Drive
6 mm (1/4")12 mm4.3 mmTX30
8 mm (5/16")14 mm5.8 mmTX40
10 mm (3/8")18 mm7 mmTX40

From the Klimas catalogue. Head and shank sizes for diameters under 6 mm on request.

Also from Klimas

Need the other head?

Not sure which size?

Tell me what you are fastening and how thick it is. I will suggest a length and send a taxes-included quote.

Text SimonSend a list

Klimas and Wkręt-met are trademarks of Klimas Wkręt-met sp. z o.o., the manufacturer of these products. Canmark Supplies is an independent reseller. Product photos, drawings and technical data are supplied by Klimas Wkręt-met.